ArchLand00073.pngInserting Stake Objects

Stake objects represent a 3D point in space, with text to display the elevation, coordinate points, or other information. Using a stake object, the elevation information for a point on the site model can be determined and labeled. A stake object can be used as a site modifier. If the design layer is georeferenced, a stake object can be used as a geographic marker.

The following modes are available.

stake_modes.png 

Mode
Description

Standard Insertion

Inserts a single stake object

Offset Insertion

Inserts a stake at each vertex of the drawn polygon shape

Preferences

Sets the default preferences for the stake object

Elevation

Sets the default elevation value for stake objects

Stake_tool.png 

To insert a stake object:

1. Click the Stake tool from the Site Planning tool set, and select the mode from the Tool bar.

2. Click on the site model to place the stake object, or draw a temporary polygon to place a series of stake objects at each click point and double-click to end the series.

If this is the first time the Stake tool has been used, the Object Properties dialog box opens. Accept the defaults and click OK.

To automatically increment the ID parameter when placing new stake objects, select Auto ID Numbering and specify an Initial ID Number. Otherwise, leave Auto ID Numbering unselected and specify the default ID Number for stake objects.

3. The stake objects are added to the drawing at the elevation specified in the Tool bar.

Select the Send to Surface command to set the stake elevation to that of the site model surface (see Sending Objects to the Site Model Surface).

4. If the stake objects are site modifiers, update the site model to apply the changes (select the site model and click Update from the Object Info palette.).

5. Move the control point to adjust the label and leader line position. If there are several stake objects, use the Align/Distribute Leader Lines command to improve readability (see Aligning and Distributing Leader Lines).

6. The stake properties can be edited in the Object Info palette.

stake_lbl.png 

~~~~~~~~~~~~~~~~~~~~~~~~~

Converting 3D Loci to Stake Objects

Site Model Section

Calculating Grade

Creating the Site Model

Updating a Site Model

Aligning and Distributing Leader Lines

 

www.vectorworks.net