Automatically Joining Walls

The Vectorworks preference Auto join walls automatically joins walls at corners and intersections, and automatically heals the mitered ends of walls when they are separated from one another. For T joins, the break in the side of the wall is healed. Walls can be in either 2D or 3D view.

Walls_edit00029.png 

When a core component has been set for walls with components, the components also automatically join. Core components, as well as the other components, join uncapped if they have the same fill, and capped otherwise.

To set the Auto join walls preference:

1. Select Tools > Options > Vectorworks Preferences.

2. On the Edit tab, select Auto join walls.

3. Click OK.

Automatically Joining Walls in Rectangle Mode

When the Vectorworks preference Auto join walls is on, walls drawn in Rectangle mode that are parallel and overlap or touch each other interact. The drawing operation can be performed using the default Add option, which combines interacting walls, or using the Subtract option, which deletes interacting wall segments. A set of rules determines these interactions.

The existing walls that interact with the new walls are highlighted while drawing.

Add option

The existing overlapped wall remains, and the new overlapping wall is not created.

Walls_edit00032.png 

If the new wall extends the existing wall and has the same style, the existing wall is extended and the new wall is not created. If the new wall has a different style, it is created.

Walls_edit00035.png 

Walls_edit00038.png 

Subtract option–press and hold Alt (Windows) or Option (Mac) while drawing

The overlapped portion of the existing wall is deleted, and the new overlapping wall is not created.

Walls_edit00041.png 

If the new wall extends the existing wall and has the same style, the existing wall is extended and the new wall is not created.

Walls_edit00044.png 

If the new wall partially extends and partially overlaps an existing wall, the overlapping portion is deleted and the extending portion is created with the new wall.

Walls_edit00047.png 

When a wall subtraction requires that the existing walls change direction to maintain the correct orientation, the wall direction changes automatically (see Wall Direction).

Walls_edit00050.png 

~~~~~~~~~~~~~~~~~~~~~~~~~

Creating Wall Components

Joining Walls

Joining Wall Components

Edit Preferences

 

www.vectorworks.net