Inserting Toilet Stalls

The Toilet Stall tool provides you with a flexible tool for creating a variety of toilet stalls for public restrooms. Toilet stall fixtures are provided as default content (default content is automatically imported into the current file at the point of use and displays in the Resource Browser; see Resource Libraries).

2. Click in the drawing file or wall to set the insertion point of the toilet stall, and click again to set the rotation. The direction of the toilet stall can be changed later by clicking Flip in the Object Info palette or from the context menu if the toilet stall is inserted in a wall, or by using the context menu commands to rotate the toilet stall if it is not.

If this is the first time a toilet stall is placed in the drawing, the Object Properties dialog box opens. Specify the default properties which apply to toilet stalls subsequently placed in this document. Toilet stall properties can be edited later in the Object Info palette.

Parameter	Description
Number of Stalls	Select the number of stalls to place together as a single, grouped object
Stall Width	Enter the stall width
Stall Depth	Enter the stall depth
Partition Thickness	Enter the thickness for the stall partitions
Clg Height (Floor and Clg Mtd or Ceiling Mtd only)	Enter the height for ceiling-mounted stall supports
Partition Type	Select the mounting type for the stall partitions If none is selected for Partition Type, all parameters related to partitions, doors, or grab bars will not have any visible effect on the toilet stall
Left Partition	Deselect to remove the left partition from the stall. If you have multiple stalls, this will only remove the farthest left partition.
Dividing Partition	Select to include partitions between each stall
Right Partition	Deselect to remove the right partition from the stall. If you have multiple stalls, this will only remove the farthest right partition.
Front Partition	Deselect to remove the front partition from the stall. If the door is set to the front partition, the door is also removed.
Door	Select to include doors on each stall
Door Closed in 3D	Select to display the stall door as closed in 3D views. Deselect to have the stall door open at an angle.
Show Door In	Select which partition for the door to be a part of, if any. Doors cannot be set to the right or left partitions if there are multiple stalls in the toilet stall group.
Door Swing	Select the direction the door opens
Door Width	Enter the door width
Door Offset	Enter the door offset from the partition
Fixture Position	Select the position of the fixture within the stall
Show 2D Accessible Icon	Display the accessible symbol in 2D view
Show Turning Circle	Display the turning circle for wheelchair access in 2D view The turning circle requires a minimum clear space in the stall 62” wide by 60” deep
Left/Rear/Right Grab Bar	Select to place a grab bar on the stated side of the stall
Show Fixture	Select to show the toilet fixture
Choose Fixture	Select the desired toilet fixture from either the default content or the current file’s content. Select a symbol from the graphical list of Symbols and click OK.

3. Click OK to set the toilet stall parameters and close the Object Properties dialog box.

Inserting Toilet Stalls

Parameter

Description