Rotation

Specifies the number of degrees to rotate the object (0.00 is horizontal)

Text Style

Select a text style from either the default content or the current file’s content. To use the style associated with the class, select <Class Text Style>. To format the text using options on the Text menu, select <Un-Styled>. See Using Text Styles and Formatting Text.

Type of Weld

Select the weld type

Symmetrical (both sides the same as Arrow Side) (AWS Only)

Select to reflect the same information on both the arrow side and the other side

Configuration (ISO Only)

Select the data display configuration; if symmetrical is selected, the information on the other side is identical to the arrow side

Arrow Side/Other Side

Select to display data on the arrow side, other side or both; if symmetrical is selected, the displayed data applies to both sides

Weld Size (Plug Weld Only)

Displays the weld size

Slot Width (Slot Weld Only)

Displays the width of the slot

Slot Length (Slot Weld Only)

Displays the length of the slot

Angle of Countersink

Displays the angle of the countersink

Depth of Filling

Displays the depth of the filling

Spacing

Displays the spacing

Number of Welds

Displays the number of welds

Finish Contour

Select the finish contour type

Finish Method

Select the finish method type

Arrow

Sets whether to have an arrow on the leader line

Position

Select the side from which the arrow on the leader line extends (left or right)

Reference

Specify whether to include a reference note

Position

Select the position of the reference note; by default, Left is selected if the arrow is on the right, or Right is selected if the arrow is on the left

Ref. Line 1

If needed, enter the data to display in the first reference line

Ref. Line 2

If needed, enter the data to display in the second reference line

Ref. Line 3

If needed, enter the data to display in the third reference line

Weld All Around

Select to place a weld all around the marker

Field Weld

Select to place a field weld flag

Position

Set the position of the field weld flag. Select Top |> to have the flag on top facing right, Top <| to have the flag on top facing left, Bottom |> to have the flag on bottom facing right, Bottom <| to have the flag on bottom facing left.